The most hated HP Designjet Z3100 error message I see is the “Rewind the roll until the front edge is visible” message. Seriously, this is the most frustrating message I could get after I just spent time feeding paper into the back of the printer and dealing with the auto paper detection (and if you have it against a wall like our set up, you have to slide it back up against the wall). If it is ever telling you to do this, the work around or paper loading trick will work here. Lift the paper release, pull the paper forward to match the blue dotted lines, and set the paper lever down. Now press the Red X button a few times until you see “Lift Lever” on the screen. Press the X a few more times until you get back to the home menu screen and at the top it displays “Paper loaded incorrectly. Remove paper”. If you can’t get back to the home screen, try pressing the menu button and that should work (depends on what version of the firmware you have).
Now continue on with the rest of my tip (Paper Menu // Paper Load) and you should be good to go. If you missed it, read Part One - Post on HP Z3100 Paper Loading Trick (avoid the error message)
Strive for Perfect Printing!-Michael
No comments:
Post a Comment