HP Z3100 - more paper loading tips (part two of incorrect load trick)

Another use for my Designjet Z3100 Tips and Tricks post the other day.

Part One - Post on HP Z3100 Paper Loading Trick (avoid the error message)

The most hated HP Designjet Z3100 error message I see is the “Rewind the roll until the front edge is visible” message. Seriously, this is the most frustrating message I could get after I just spent time feeding paper into the back of the printer and dealing with the auto paper detection (and if you have it against a wall like our set up, you have to slide it back up against the wall). If it is ever telling you to do this, the work around or paper loading trick will work here. Lift the paper release, pull the paper forward to match the blue dotted lines, and set the paper lever down. Now press the Red X button a few times until you see “Lift Lever” on the screen. Press the X a few more times until you get back to the home menu screen and at the top it displays “Paper loaded incorrectly. Remove paper”. If you can’t get back to the home screen, try pressing the menu button and that should work (depends on what version of the firmware you have).

Now continue on with the rest of my tip (Paper Menu // Paper Load) and you should be good to go. If you missed it, read Part One - Post on HP Z3100 Paper Loading Trick (avoid the error message)

Strive for Perfect Printing!
-Michael

HP Z3100 "Paper loaded incorrectly: remove paper" work around and fix

I just spent 10 minutes trying to autoload the paper, I have no intentions of removing it. If you have this issue with your designjet Z3100 or Z2100, there is an easy fix to this. This also works if you would like to manually load the paper by lifting the paper release lever and bringing the paper to the blue dotted lines in front. Once the paper is aligned, lower the paper release handle. The dreaded error "paper loaded incorrectly: remove paper" will pop up. Ignore this, Press X instead. Once the menu pops up again, choose Paper >> Paper load. It should read the paper back in and you should be able to continue as normal, avoiding the hassle of starting the auto load over again. This has saved me a great deal of time since I figured this out. There are many other practical uses for this, such as if the front of the paper is slightly damaged and won't auto feed through the printer normally or if the cut isn't perfect along the front edge.

Happy Printing.

*Update: Part Two of Incorrect Paper Load Trick has more useful info on this.